Glock 48 9mm – 4.17″ Barrel, Two 10-Round Magazines & Case

The Glock 48 9mm is a Slimline-series pistol designed around the 9mm Luger cartridge and a relatively slim overall profile. This particular listing includes two 10-round magazines and a case, as specified by the seller. Buyers should review the photographs and the seller’s condition notes carefully for the exact condition and included accessories.

Important specification note: Glock’s published specifications identify the G48 barrel length as 4.17 inches (106 mm). If the firearm or its packaging is marked differently, the markings on the specific firearm should be treated as the controlling information for the individual listing.

Glock 48 9mm Specifications

The Glock 48 is chambered in 9mm Luger and uses Glock’s Safe Action operating system. Official Glock specifications list a standard magazine capacity of 10 rounds, a 4.17-inch barrel, an overall length of approximately 7.28 inches, and an overall width of approximately 1.10 inches.

The Slimline configuration provides a narrower frame and slide profile than many traditional double-stack Glock models. The design incorporates a polymer frame, Glock’s established operating system, and a compact form intended to balance handling characteristics with a slimmer overall profile.

For additional information about Glock’s current specifications and model information, see our Glock Pistols collection and 9mm Pistols category.

Included Accessories

According to the supplied listing information, this Glock 48 includes:

• Glock 48 9mm pistol
• Two 10-round magazines
• Case
• Any additional accessories specifically shown in the product photographs

Because accessories can vary between individual pre-owned firearms, customers should verify that all items they expect to receive are explicitly listed or shown in the photographs.

For related accessories and storage products, visit our Firearm Accessories and Gun Cases pages.

Condition

The exact condition of this individual firearm should be evaluated from the photographs and the accompanying condition description. Pre-owned firearms can show varying degrees of finish wear, handling marks, holster wear, scratches, or other cosmetic characteristics that do not necessarily appear in a short written description.

Before completing a transfer, the purchaser should inspect the firearm in accordance with applicable laws and the procedures of the transferring Federal Firearms Licensee (FFL). Any concerns about mechanical condition should be addressed by a qualified gunsmith or Glock-certified armorer.

Manufacturer Information

Glock provides official owner’s manuals, maintenance information, product resources, warranty information, and safety materials through its website. Glock specifically provides an owner’s manual covering the G17 through G48 models.

For authoritative information, consult Glock’s official downloadable materials, including the owner’s manual and maintenance documentation.

Glock also recommends regular cleaning and lubrication and provides maintenance guidance describing when cleaning should be performed, including after firing or exposure to environmental contaminants.

Safe Handling and Storage

Every firearm should be treated as loaded until personally verified otherwise. Keep the muzzle pointed in a safe direction, keep your finger outside the trigger guard until you have made the decision to fire, and be certain of your target and what lies beyond it.

Read the complete manufacturer’s owner’s manual before operating the firearm. Glock’s safety documentation emphasizes that failure to follow its safety instructions can result in serious injury, death, or property damage.

Use only appropriate factory-produced ammunition in the correct caliber and follow the manufacturer’s ammunition recommendations. Glock advises using ammunition manufactured to recognized industry standards and provides specific guidance concerning ammunition selection in its official FAQ.

When the firearm is not being used, secure it against unauthorized access. Appropriate storage should account for applicable federal, state, and local requirements as well as the manufacturer’s recommendations.

For additional information, see our Firearm Safety Resources and FFL Transfer Information pages.

Glock 48 9mm Overview

The Glock 48 combines a 9mm chambering with Glock’s Slimline configuration and a 10-round standard magazine capacity. Its published dimensions include an approximately 7.28-inch overall length and 1.10-inch overall width, while the standard barrel specification is 4.17 inches.

This listing includes two 10-round magazines and a case, making the accessory package an important part of the overall listing details. As with any firearm purchase, customers should carefully review the individual firearm’s photographs, condition description, specifications, included accessories, and applicable transfer requirements before proceeding.

For manufacturer information, maintenance instructions, and safety documentation, customers should rely on official Glock resources and the owner’s manual rather than third-party modifications or unofficial specifications. Glock also states that modifications can affect warranty coverage and recommends against altering the pistol with aftermarket parts.

SEO keywords: Glock 48 9mm, Glock 48 9mm pistol, Glock 48 10 round magazine, Glock 48 4.17 barrel, Glock Slimline 9mm, Glock 48 case, Glock 48 specifications, 9mm Glock pistol.